On 5/14/2014 10:11 PM, Rick - DJ0IP / NJ0IP wrote:
If the problem is being caused by common mode current,
It may be, but I suspect something as simple as direct radiation from
the antennas being picked up on the shields of cables plugged into the
radio -- those cables are acting as RX antennas -- and and that current
flows into the radio via the Pin One Problem.
In other words, the TX antenna works just fine, but the UNINTENTIONAL
receiving antenna (the mic cable, or other cables) are also working just
fine.
73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|