TenTec Mailing List (date)

TenTec Mailing List (date)

[Thread Index] [Top] [All Lists]

January 31, 2012

Re: [TenTec] Oll & RF @mic input., kc9cdt, 21:33
Re: [TenTec] Oll & RF @mic input., Stuart Rohre, 21:24
Re: [TenTec] Oll & RF @mic input., Stuart Rohre, 21:18
Re: [TenTec] Oll & RF @mic input., Jim Brown, 20:33
Re: [TenTec] Model 318 Amplifier Key Interface, kc9cdt, 19:47
[TenTec] Model 318 Amplifier Key Interface, Gary Winkelman, 19:26
Re: [TenTec] Oll & RF @mic input., kc9cdt, 18:12
Re: [TenTec] Oll & RF @mic input., Ron Castro, 18:11
Re: [TenTec] Oll & RF @mic input., PC Anderson, 17:58
Re: [TenTec] Oll & RF @mic input., PC Anderson, 17:54
Re: [TenTec] Oll & RF @mic input., Carter, 17:36
Re: [TenTec] Oll & RF @mic input., Stuart Rohre, 17:06
[TenTec] Orion 565 V3.025 is uploaded, John Henry, 16:36
Re: [TenTec] RX366, John Molenda, 16:23
[TenTec] What is Version 3 Orion 565/566 Firmware?, John Henry, 15:11
[TenTec] New RX366 receiver, BOB@W2PNJ, 14:40
Re: [TenTec] New Products Available for Sale at TenTec, Chris Hansohn, 14:28
Re: [TenTec] New Products Available for Sale at TenTec, doug, 14:26
Re: [TenTec] New Products Available for Sale at TenTec, John Henry, 13:35
[TenTec] New Products Available for Sale at TenTec, John Henry, 13:30
Re: [TenTec] RX366 -- Yes or No?, BobK8IA, 13:17
Re: [TenTec] RX366, kc9cdt, 13:06
Re: [TenTec] RX366 -- Yes or No?, kc9cdt, 13:05
Re: [TenTec] RX366, Rsoifer, 12:31
[TenTec] RX366 -- Yes or No?, Eric Rosenberg, 12:04
Re: [TenTec] RX366, kc9cdt, 11:13
Re: [TenTec] RX366, kc9cdt, 11:11
Re: [TenTec] RX366, Charles Strickland, 11:09
Re: [TenTec] RX366, Duane Calvin, 11:02
Re: [TenTec] RX366, kc9cdt, 10:55
Re: [TenTec] RX366, Rick - DJ0IP / NJ0IP, 10:22
Re: [TenTec] RX366, Barry N1EU, 09:44
Re: [TenTec] RX366, Rsoifer, 09:33
Re: [TenTec] RX366, Rick - DJ0IP / NJ0IP, 08:48
[TenTec] TenTec 217 & 218 Filters, d . e . warnick, 07:52

January 30, 2012

Re: [TenTec] ORION II and P3, John Molenda, 22:09
Re: [TenTec] Oll & RF @mic input., Richards, 22:03
Re: [TenTec] ORION II and P3, Stephen Cannon, 21:51
Re: [TenTec] RX366, Randall Graham, 21:34
Re: [TenTec] RX366, Richards, 21:03
Re: [TenTec] ORION II and P3, John Molenda, 20:01
Re: [TenTec] (no subject), Richard Schmidt, 18:13
Re: [TenTec] (no subject), GARY HUBER, 17:43
[TenTec] Oll & RF @mic input., PC Anderson, 17:36
Re: [TenTec] ORION II and P3, Stephen Cannon, 16:28
[TenTec] (no subject), Dan Mees, 15:43
Re: [TenTec] RX366, v3 firmware, Rsoifer, 15:17
Re: [TenTec] RX366, v3 firmware, amsctalx, 14:25
Re: [TenTec] ORION II and P3, John Molenda, 14:11
Re: [TenTec] RX366, v3 firmware, Barry N1EU, 13:50
Re: [TenTec] RX366, v3 firmware, amsctalx, 13:36
Re: [TenTec] RX366, Barry N1EU, 13:26
[TenTec] RX366, v3 firmware, John Henry, 13:16
[TenTec] RX366, Jim Noe, 13:12
Re: [TenTec] RX366, v3 firmware, Barry N1EU, 12:14
Re: [TenTec] RX366, v3 firmware, Pat Patterson, 12:10
[TenTec] FS:Omni D/B, Hulett, Russell, 11:57
[TenTec] ORION II and P3, dbp tds.net, 09:21

January 29, 2012

[TenTec] F/S Hercules II and Model 9420 Power Supply, Bill Gaines, 18:11
Re: [TenTec] RX366, v3 firmware, Tom Berry, 15:34
[TenTec] RX366, v3 firmware, Barry N1EU, 13:01

January 28, 2012

[TenTec] FS: TenTec model 550 PEGASUS, Ken Booher, 16:10
[TenTec] 4 Sale TenTec OMNI C SN:546-3867, Richard Detweiler, 12:21
Re: [TenTec] OT: EXAMPLE: Feeding a groundplane with Openwire, Richard Schmidt, 10:49
[TenTec] OT: EXAMPLE: Feeding a groundplane with Openwire, Rick - DJ0IP / NJ0IP, 06:09

January 27, 2012

[TenTec] Scout 30 meter module for sale, Roger, 22:50
[TenTec] 1.8 Filter needed for Ten Tec Paragon Needed, wade staggs, 18:51
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 18:33
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Joel Hallas, 17:45
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 17:23
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Joel Hallas, 16:47
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jerry Haigwood, 16:31
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Richards, 16:27
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jim Brown, 16:08
Re: [TenTec] Best manual for OMNI 546 series B?, Richards, 16:07
[TenTec] FS: Inrad 2100hz filter, Barry N1EU, 15:22
Re: [TenTec] Best manual for OMNI 546 series B?, Carl Moreschi, 15:19
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 14:41
[TenTec] Best manual for OMNI 546 series B?, scottsheppard, 14:36
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 14:13
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Phil Sussman, 13:36
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jim Brown, 12:49
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Joel Hallas, 12:18
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Jim Brown, 12:05
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 11:45
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Richards, 10:25
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Rick - DJ0IP / NJ0IP, 08:56
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Joel Hallas, 08:52
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 08:11
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Carl Moreschi, 07:59
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Rick - DJ0IP / NJ0IP, 03:29
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Richards, 02:41
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Rick - DJ0IP / NJ0IP, 02:26
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Richards, 02:01
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Rick - DJ0IP / NJ0IP, 01:22
[TenTec] Ten Tec Scout 30 meter module for sale, Roger, 01:20
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Rick - DJ0IP / NJ0IP, 00:19
Re: [TenTec] Source for large knife switch, John Molenda, 00:06

January 26, 2012

[TenTec] Re [Ten Tec] Grounds and balanced fed verticals, ChasW3KC, 23:57
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Jim Brown, 23:44
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Richards, 22:44
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Joel Hallas, 21:44
[TenTec] X-Lock-3, scottsheppard, 20:49
Re: [TenTec] Re; tantalums failing, Stuart Rohre, 17:53
Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Jim Brown, 17:08
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 17:06
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Rick - DJ0IP / NJ0IP, 16:31
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Carl Moreschi, 16:20
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals -where have the balanced tuners gone?, Stuart Rohre, 16:00
Re: [TenTec] Re. [Ten Tec] Grounds, Stuart Rohre, 15:55
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Richards, 15:52
[TenTec] Re. [Ten Tec] --- and balanced fed verticals, Stuart Rohre, 15:36
Re: [TenTec] Knife switch, Joe, 15:31
[TenTec] knife switch, Bill Harris, 15:20
[TenTec] Knife switch, Bill Harris, 15:17
[TenTec] Source for large knife switch, Rich Jones, 14:38
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 14:18
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jim Brown, 13:30
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jim Brown, 13:20
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Phil Sussman, 12:37
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Rick - DJ0IP / NJ0IP, 12:06
Re: [TenTec] X-Lock-3, Steve Hunt, 11:57
[TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 11:52
Re: [TenTec] X-Lock-3, N6QW, 11:38
Re: [TenTec] swapping a tantalum..., N9TZL, 11:33
Re: [TenTec] [Ten Tec] Grounds, PC Anderson, 11:32
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 10:57
Re: [TenTec] X-Lock-3, Pete Juliano, 10:48
[TenTec] Re; tantalums failing, GRG, 10:46
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 10:00
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Steve Hunt, 09:34
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Carl Moreschi, 08:43
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Carl Moreschi, 08:21
[TenTec] [Ten Tec] Grounds, Don Allen, 08:14
Re: [TenTec] X-Lock-3, Charles P. Steinmetz, 03:05
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Rick - DJ0IP / NJ0IP, 01:54

January 25, 2012

Re: [TenTec] Re. [Ten Tec] Grounds, John, 23:50
[TenTec] X-Lock-3, N6QW, 23:49
Re: [TenTec] X-lock 3 VFO Staibilizer is online, Jerry Haigwood, 22:53
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jim Brown, 22:38
[TenTec] X-lock 3 VFO Staibilizer is online, scottsheppard, 22:32
Re: [TenTec] X-lock 3 VFO Staibilizer is online, Keith Hamilton, 21:23
Re: [TenTec] X-lock 3 VFO Staibilizer is online, Barry N1EU, 21:11
[TenTec] X-lock 3 VFO Staibilizer is online, scottsheppard, 21:02
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Carl Moreschi, 20:59
[TenTec] Re. [Ten Tec] Grounds, John Farler, 20:02
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jim Brown, 19:29
Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Stuart Rohre, 18:09
Re: [TenTec] Re. [Ten Tec] Grounds, Richard Schmidt, 15:55
Re: [TenTec] Re. [Ten Tec] Grounds, Stuart Rohre, 15:30
Re: [TenTec] Re. [Ten Tec] Grounds, Stuart Rohre, 15:23
Re: [TenTec] Re. [Ten Tec] Grounds, Jim Brown, 13:04
Re: [TenTec] X-lock 3 VFO Staibilizer is online, Barry N1EU, 12:53
[TenTec] X-lock 3 VFO Staibilizer is online, Keith Hamilton, 12:33
Re: [TenTec] Re. [Ten Tec] Grounds, Ten-Tec Amateur Radio Sales, 09:00

January 24, 2012

Re: [TenTec] Re. [Ten Tec] Grounds, wade staggs, 20:30
Re: [TenTec] Re. [Ten Tec] Grounds, John, 19:14
[TenTec] Inrad filters for Orion II, iz2kxc, 19:14
Re: [TenTec] Eagle roofing filters, Rodney, 18:21
Re: [TenTec] Re. [Ten Tec] Grounds How to Bond?, Stuart Rohre, 17:55
Re: [TenTec] Re. [Ten Tec] Grounds, Jim Brown, 17:35
Re: [TenTec] grounds, Stuart Rohre, 17:33
Re: [TenTec] Re. [Ten Tec] Grounds, George Allgood, 17:11
Re: [TenTec] swapping a tant. (addendum), Stuart Rohre, 16:34
Re: [TenTec] Re. [Ten Tec] Grounds, Stuart Rohre, 15:47
Re: [TenTec] Re. [Ten Tec] Grounds and power grid noise, Phil Sussman, 13:44
Re: [TenTec] swapping a tant. (addendum), Roy, 13:18
Re: [TenTec] swapping a tantalum..., Roy, 12:51
Re: [TenTec] noise on Orion II, John Molenda, 12:48
Re: [TenTec] noise on Orion II, Dean, 09:29
Re: [TenTec] Re. [Ten Tec] Grounds and power grid noise, Richards, 02:17
[TenTec] Re. [Ten Tec] Grounds and power grid noise, Ken Brown, 00:33

January 23, 2012

Re: [TenTec] Re. [Ten Tec] Grounds, Gary Hoffman, 19:15
Re: [TenTec] OMNI VI, John Molenda, 18:46
[TenTec] Re. [Ten Tec] Grounds, Don Allen, 18:42
[TenTec] OMNI VI, Paul Kraemer, 17:46
Re: [TenTec] OT: swapping a Tantalum for a Electrolytic, N9TZL, 17:02
[TenTec] Omni 6/3 Serial Port Interface problem., Paul, 14:30
Re: [TenTec] Wanted, BUDW2GLN, 13:54
Re: [TenTec] Wanted, John, 07:59
Re: [TenTec] Wanted, Ralph, 05:45
Re: [TenTec] WTB Ten Tec Banana Mic for Triton II, Ken Brown, 03:24
[TenTec] WTB Ten Tec Banana Mic for Triton II, Vincent, 02:33
[TenTec] Wanted, BUDW2GLN, 00:27
[TenTec] Wanted, BUDW2GLN, 00:24

January 22, 2012

Re: [TenTec] grounds, Clayton Brantley, 21:38
[TenTec] Omni VI sold, Keith Hamilton, 15:55
Re: [TenTec] grounds, Jim Brown, 13:03
Re: [TenTec] FS: Ten-Tec Omni VII w/ auto-tuner (588AT), amsctalx, 13:02
Re: [TenTec] FS: Ten-Tec Omni VII w/ auto-tuner (588AT), James C. Owen, III, 10:31
Re: [TenTec] grounds, davkozy, 09:15

January 21, 2012

Re: [TenTec] OT: swapping a Tantalum for a Electrolytic, Bwana Bob, 19:21
Re: [TenTec] FS: 960 Power Supply, Barry N1EU, 14:51
[TenTec] FS: 960 Power Supply, Barry N1EU, 11:51
[TenTec] Eagle roofing filters, Tom Berry, 10:36
Re: [TenTec] FS: 307 Speaker, matches Omni5/6, Barry N1EU, 09:57
[TenTec] FS: 307 Speaker, matches Omni5/6, Barry N1EU, 06:56
[TenTec] Omni VI Logic Board, n5bi@juno.com, 00:49

January 20, 2012

[TenTec] Wanted Orion II (566), knesbitt, 21:39
Re: [TenTec] grounds, Casey, 18:58
[TenTec] Omni 6 Option 3 For Sale, Keith Hamilton, 13:07
Re: [TenTec] RX-366?, Jose F Ballester, 09:42
[TenTec] grounds, Walt Amos, 09:04
[TenTec] RX-366?, John Henry, 08:18
Re: [TenTec] noise on Orion II GROUNDING, Richards, 02:15

January 19, 2012

Re: [TenTec] RX-366?, Jose F Ballester, 22:51
Re: [TenTec] Orion 1 Smudge on the Screen., Barry N1EU, 17:01
Re: [TenTec] RX-366?, TroyW6HV, 16:39
Re: [TenTec] RX-366?, John Henry, 16:19
Re: [TenTec] Orion 1 Smudge on the Screen., Kim Elmore, 16:10
[TenTec] Orion 1 Smudge on the Screen., Paul, 16:00
Re: [TenTec] noise on Orion II GROUNDING, John Molenda, 13:47
Re: [TenTec] noise on Orion II GROUNDING, Kris Merschrod, 06:26
Re: [TenTec] noise on Orion II, Jim Weisz, 00:36

January 18, 2012

[TenTec] Orion II for sale, Steve Bookout, 23:06
Re: [TenTec] OT: swapping a Tantalum for a Electrolytic, Don Jones, 16:37
Re: [TenTec] noise on Orion II, John Molenda, 15:50
[TenTec] Eagle CW question, Carl Winkles, 13:17
Re: [TenTec] noise on Orion II, Dean, 08:12

January 17, 2012

Re: [TenTec] OT: swapping a Tantalum for a Electrolytic, Stuart Rohre, 15:34
Re: [TenTec] 2nd RX for Orion........Status, Rsoifer, 12:38
[TenTec] 2nd RX for Orion........Status, Tim Wininger, 12:28
[TenTec] 961 Schematic/Manual, Joe, 11:53
[TenTec] noise on Orion II, John Molenda, 11:04
[TenTec] Need RF board for Jupiter, John Farler, 10:34
Re: [TenTec] Tuner Questions, Steve Hunt, 03:53
Re: [TenTec] Tuner Questions, Richards, 03:05

January 16, 2012

Re: [TenTec] Omni VI+/960 PS down, Ron Notarius W3WN, 23:08
Re: [TenTec] Tuner Questions, Jerry, N9AW, 22:38
Re: [TenTec] Omni VI+/960 PS down, Rick W, 21:45
Re: [TenTec] Tuner Questions, Jose F Ballester, 21:36
Re: [TenTec] Omni VI+/960 PS down, Mike Bryce, 21:00
Re: [TenTec] Omni VI+/960 PS down, Ron Notarius W3WN, 19:34
Re: [TenTec] Omni VI+/960 PS down, k3miy, 19:23
Re: [TenTec] Tuner Questions, Duane Calvin, 19:00
Re: [TenTec] Tuner Questions, Richards, 18:21
Re: [TenTec] Omni VI+/960 PS down, Ron Notarius W3WN, 18:20
Re: [TenTec] Tuner Questions, Tony Lelieveld, 18:11
[TenTec] Omni VI+/960 PS down, Ron Notarius W3WN, 18:11
Re: [TenTec] Tuner Questions, Jim Brown, 16:52
Re: [TenTec] Tuner Questions, d . e . warnick, 16:37
Re: [TenTec] Tuner Questions, Greg S, 16:37
Re: [TenTec] Tuner Questions, denton, 15:50
Re: [TenTec] Tuner Questions, Barry N1EU, 15:46
Re: [TenTec] Tuner Questions, BUDW2GLN, 15:37
[TenTec] Tuner Questions, Richard Bell, 15:19
[TenTec] OT: swapping a Tantalum for a Electrolytic, Bill W1PA, 15:17
Re: [TenTec] Anyone recently replace an Orion 565 LCD?, Vic Klein, 08:05
Re: [TenTec] Triton II, Vincent, 04:55

January 15, 2012

Re: [TenTec] Anyone recently replace an Orion 565 LCD?, Ralph Matheny K8RYU, 23:19
[TenTec] Triton II, Keith Hamilton, 17:24
Re: [TenTec] Anyone recently replace an Orion 565 LCD?, al sirois, 17:23
Re: [TenTec] Anyone recently replace an Orion 565 LCD?, Randy Fulco, 16:04
[TenTec] PTO / DDS conversion for Argosy, Scott Sheppard, 16:02
Re: [TenTec] Anyone recently replace an Orion 565 LCD?, Lee WA3FIY, 15:52
[TenTec] Anyone recently replace an Orion 565 LCD?, Barry N1EU, 10:51

January 14, 2012

[TenTec] Omni VI for sale, Barry N1EU, 18:02
Re: [TenTec] Tuning knob friction adjustment, Fernando, 14:51
Re: [TenTec] Tuning knob friction adjustment, d . e . warnick, 13:31
Re: [TenTec] Orion power connector needed, Bill Harris, 12:24
Re: [TenTec] Tuning knob friction adjustment, Lee WA3FIY, 12:06
[TenTec] Tuning knob friction adjustment, Barry N1EU, 11:30
Re: [TenTec] TenTec Digest, Vol 109, Issue 12, Rod Greene, 09:28
[TenTec] Orion LCD backlight adjustment?, Barry N1EU, 08:53
[TenTec] Orion power connector needed, Barry N1EU, 06:56

January 13, 2012

[TenTec] Anyone want to trade filters?, Paul, 15:50
[TenTec] Hercules II for sale, dbp tds.net, 15:46
Re: [TenTec] RX-366?, Rsoifer, 12:44
Re: [TenTec] RX-366?, John Henry, 11:54
[TenTec] RX-366?, Rsoifer, 11:35

January 12, 2012

Re: [TenTec] TenTec Digest, Vol 109, Issue 12, SAM BRIDGES, 16:19

January 11, 2012

[TenTec] 9423 remote head for herc II, Allan Taylor, 22:25

January 10, 2012

[TenTec] (no subject), n4dxi@arrl.net, 19:47
[TenTec] Wanted: Inrad 2.8Khz filters, Barry N1EU, 06:03

January 09, 2012

Re: [TenTec] Orion II with transverter ?, Simone, 17:38
[TenTec] Test, raybald1138, 17:13
[TenTec] fs tentec station, SAM BRIDGES, 16:11
Re: [TenTec] For Sale OMNI VI+ and P/S, Joe, 15:57
Re: [TenTec] For Sale OMNI VI+ and P/S, Joe, 12:18
Re: [TenTec] For Sale OMNI VI+ and P/S, Glenn, 11:49
[TenTec] For Sale OMNI VI+ and P/S, Joe, 10:27

January 07, 2012

Re: [TenTec] Why "Re: [english 100%] Re: Orion s-meter calibration"?, John B. Egger, 20:15
Re: [TenTec] Why "Re: [english 100%] Re: Orion s-meter calibration"?, wade staggs, 18:36
Re: [TenTec] Why "Re: [english 100%] Re: Orion s-meter calibration"?, art davis, 14:14
[TenTec] Why "Re: [english 100%] Re: Orion s-meter calibration"?, John B. Egger, 08:38
Re: [TenTec] [english 100%] Re: [english 100%] Re: Orion s-meter calibration, Holger Göckritz, 02:10

January 06, 2012

Re: [TenTec] [english 100%] Re: Orion s-meter calibration, art davis, 23:57
Re: [TenTec] [english 100%] Re: Orion s-meter calibration, Mike, K9UW, 21:19
Re: [TenTec] [english 100%] Re: Orion s-meter calibration, art davis, 19:01
Re: [TenTec] eagle, Jim Vohland, 16:51
[TenTec] eagle, Rodney, 16:48
Re: [TenTec] 715, PC Anderson, 16:09
Re: [TenTec] 715, Steve Berg, 16:06
Re: [TenTec] For sale, k3miy, 14:40
Re: [TenTec] 715, PC Anderson, 14:36
Re: [TenTec] 715, wade staggs, 14:33
[TenTec] 715, PC Anderson, 14:25
Re: [TenTec] [english 100%] Re: Orion s-meter calibration, art davis, 13:01
Re: [TenTec] [english 100%] Re: Orion s-meter calibration, Barry N1EU, 10:56
Re: [TenTec] [english 100%] Re: Orion s-meter calibration, art davis, 10:52
Re: [TenTec] [english 100%] Re: Orion s-meter calibration, kc9cdt, 10:27
Re: [TenTec] Orion s-meter calibration, Mark, 10:02
Re: [TenTec] [english 100%] Re: Orion s-meter calibration, Holger Göckritz, 02:58
Re: [TenTec] For sale, Pete Juliano, 00:27

January 05, 2012

[TenTec] For sale, Chris, 23:29
[TenTec] For sale, Chris Boone, 20:23
Re: [TenTec] Orion s-meter calibration, art davis, 15:00
[TenTec] Triton II is sold, N6QW, 13:50
Re: [TenTec] Triton II & AC, Keith Hamilton, 11:44
Re: [TenTec] Triton II & AC, Keith Hamilton, 11:42
[TenTec] Triton II & AC, N6QW, 08:38

January 04, 2012

Re: [TenTec] SWR meter glitch on Scout 555, Bwana Bob, 18:51

January 03, 2012

Re: [TenTec] Orion II with transverter ?, Carl Moreschi, 20:18
Re: [TenTec] Orion II with transverter ?, Rodney, 18:22
[TenTec] Orion II with transverter ?, Simone, 18:13
Re: [TenTec] SWR meter glitch on Scout 555, Stuart Rohre, 15:11
[TenTec] SWR meter glitch on Scout 555, Casey, 08:40

January 02, 2012

[TenTec] (no subject), Smileywb4, 09:15

January 01, 2012

Re: [TenTec] OT: Old QSTs, CQs, etc., Richards, 22:59