Paul...
Make sure the clock signal is on connector 57 on the display driver board.
That signal comes from the audio processor board.
Phil C. Sr.
k4dpk
----- Original Message -----
From: "Paul" <hglent@frii.com>
To: <tentec@contesting.com>
Sent: Saturday, November 05, 2011 2:32 PM
Subject: [TenTec] Corsair II Keyer in op. Need advice.
Greeting. Isn't the band openings fun?
My Corsair II Iambic Keyer has stopped working. I have traced it down
to the Logic Board.
Everything else on the logic Board is working fine. All of the display
functions are just as they should be. It is just that I can not key
with the paddles, and the Memory Key don't work.
So I need advice. Should I call Ten Tec and try to buy the MC68705P3, or
is there any other fix for this problem?
Thanks
Paul K.
WA0BAG
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|