Re: [TenTec] Corsair II sidetone mod

[Steve Hunt <steve@karinya.net>]

If I were to implement Joe's sidetone mod I would build it on a small 
board, then mount that board on a couple of short stand-offs bolted to 
my replacement logic board:

* It looks like there's plenty of room to do it
* No mechanical modifications to the radio would be required
* The 5v supply for the PIC is already available from the Logic board, 
so no need for the 5v regulator and associated components
* The keying signal is readily available on the Logic board

The only external wiring needed would be the audio output.

Steve G3TXQ

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec