TenTec
[Top] [All Lists]

Re: [TenTec] was OT: Indoor Antenna: re B&W type terminated dipoles

To: tentec@contesting.com
Subject: Re: [TenTec] was OT: Indoor Antenna: re B&W type terminated dipoles
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 07 Dec 2010 09:12:06 -0600
List-post: <mailto:tentec@contesting.com>


On 12/7/2010 5:58 AM, Jim WA9YSD wrote:

Any antenna for that matter looses 1/2 their power or more when operated on a
band that it is not designed for.

Why do you say that? I don't agree. It may not radiate in the direction it did on the fundamental. The system may loose power from matching network losses when the impedance is obnoxious to match, and the really short antenna looses radiation efficiency.

Efficiency for a folded dipole has a factor of around 0.98
Efficiency for the common dipole is about 0.1

Nah, there's no reason the common dipole should be poorer than the folded dipole.

Efficiency for the Double bazooka is about 0.89

Balderdash. The double bazooka is no better than a folded dipole and has no significantly greater bandwidth except what comes from the fatter radiator ends of shorted together twin lead. It suffers from having tiny conductors encased in insulation that make it structurally weak in wind and ice. If cross connected at the center instead of the original series connection, the two quarter wave coax stubs do compensate for reactance changes and give that variation a greater impedance bandwidth. But its still wimpy and breaks all the time in the real world.

Efficiency for the above cases is its ability to couple.  So your use of the
word efficiency must be defined better so it is not so confusing as to what
exactly your talking about.


Stay on course, fight a good fight, and keep the faith.  Jim K9TF/WA9YSD

-----------------------------------------------------
73, Jerry, K0CQ

<Prev in Thread] Current Thread [Next in Thread>