thank you Onno!
jack
ak7o
----- Original Message -----
From: "pa1ap" <pa1ap@nextchallenge.net>
To: tentec@contesting.com
Sent: Monday, February 22, 2010 4:45:39 PM GMT -05:00 US/Canada Eastern
Subject: [TenTec] TT orion AGC Macro V2 program available
Greetings,
Perhaps of use for other Orion operators. We have finished developing & testing
a small windows program (tested on XP, Vista and 7) which allows very quick
adjustment of threshold and RF gain through graphical user interface. Besides
regular sliders it also provides S meter buttons associated with combined
threshold knee point and RF Gain settings. For each Orion firmware the user can
create own settings associated with S meter values as available through the
program. Look at main S-meter for undesired signal level (for example S4 band
noise) and click within the program on S4 or S5... This will adjust threshold
and RF Gain to "optimized" value with one click.
At minimum it provides a quick way to adjust threshold and RF Gain in a single
screen without having to dive into menu etc. Program size is about 350 Kbyte
and is available through download in yahoo TT 565 forum. Program has been used
and tested for both Orion 565 and 566 and results are good.
Best regards, Onno pa1ap
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|