| To: | tentec@contesting.com |
|---|---|
| Subject: | Re: [TenTec] TT Centurion AMP failure |
| From: | "Dr. Gerald N. Johnson" <geraldj@weather.net> |
| Reply-to: | geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com> |
| Date: | Wed, 17 Feb 2010 19:32:28 -0600 |
| List-post: | <mailto:tentec@contesting.com> |
On Wed, 2010-02-17 at 23:29 +0000, Mike Schatzberg wrote: > The triodes are a zero bias tube, and 200 mils sounds close for no bias > voltage. The amp should still make power, although in the wrong class of > service. If it does make power, you have lost your cut off bias voltage and > will have to trouble shoot that circuit. If both tubes are glowing about the > same color, good chance the bias supply is your problem or your bias voltage > switching. 73 and Happy DXing, Mike W2AJI Tryon NC > > Or the keying line is stuck keyed to transmit. Might be a cable or the driver, not the PA. 73, Jerry, K0CQ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TenTec] TT Centurion AMP failure, Mike Schatzberg |
|---|---|
| Next by Date: | Re: [TenTec] TT Centurion AMP failure, Gary Hoffman |
| Previous by Thread: | Re: [TenTec] TT Centurion AMP failure, Mike Schatzberg |
| Next by Thread: | Re: [TenTec] TT Centurion AMP failure, Phil Chambley Sr. |
| Indexes: | [Date] [Thread] [Top] [All Lists] |