Hello,
Thanks for the responses. I built a cable and the RX-320 works great. It is
an amazing receiver.
Best,
DW Holtman
WB7SSN
----- Original Message -----
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
To: <tentec@contesting.com>
Sent: Monday, March 16, 2009 4:30 PM
Subject: Re: [TenTec] R-320 Question
On Mon, 2009-03-16 at 16:05 -0600, DW Holtman wrote:
Hello,
Quick question. Is the serial cable from an R-320 a straight cable? That
is,
is pin 1 wired to pin 1 etc?
Thank you,
DW Holtman
WB7SSN
Pins 1 and 7 on a 25 pin serial cable are chassis and signal grounds.
They are always wired straight. 2, 3, 4, 5, 6, 8, and 20 are signals
that are sometimes crossed. Much the same applies to 9 pin but I don't
have those pin numbers memorized.
73, Jerry, K0CQ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|