Hello Bernie
I can confirm that the 02 works well with FSK, and Im using N1MM / MMTTY.
The input to the mark/space Connector is at the back of the rig, and you
should be able to monitor the tones when transmitting.
Im using a home built interface with RS232 outputs from the PC. I found it
very confusing using virtual ports as in a USB connection and I had to play
with MMTTY setup a while to get FSK to work, But thats me Hi...
73
Dave
----- Original Message -----
From: <K5XS@aol.com>
To: <tentec@contesting.com>
Sent: Thursday, December 27, 2007 3:48 PM
Subject: [TenTec] FSK on Orion II?
Has anyone had success running FSK on the Orion II?
I am running MMTTY, and it works great on AFSK. Receive works fine on
FSK,
but when I send, the distant end (including the other side of the shack)
receives garbage.
I have tried toggling the Mark state on the Orion II menu (from High to
Low), but that doesn't make things any better.
I would like to use FSK because I _love_ the way the filters set up on the
Orion.
I am no expert on RTTY, much less RTTY on an Orion, so any clues--no
matter
how basic--appreciated.
73 and Happy 2008 to all.
Bernie K5XS
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|