TenTec
[Top] [All Lists]

Re: [TenTec] almost OT (involves Omni VI)

To: <atrampler@att.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] almost OT (involves Omni VI)
From: "K9MI" <k9mi@sbcglobal.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 14 Dec 2007 15:42:49 -0000
List-post: <mailto:tentec@contesting.com>
Art, I guess the correct answer is yes and yes. There are a lot of crappy signals on the bands. I think if you added the next 500 hz filter (6 mhz I believe), you will eliminate most of the problem signals. I had the exact same rig you do a couple of years ago, and had a borrowed 6 mhz filter, and I didn't notice the problems you mention. With the 6 mhz filter and use of the PBT, I think will really help your situation. I think Inrad still makes roofing filters for the Omni 6 that would help also, but in my situation, I didn't feel I needed it with the Omni 6. The good news is that you can find Ten Tec filters at a very reasonable price. Many Yaesu 1000 MPs are on the air, and if they have not had the "key click mod", they can cause a lot of trouble. For more info on "key clicks", check out http://www.w8ji.com/keyclicks.htm

73, Mike K9MI


----- Original Message ----- From: <atrampler@att.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Friday, December 14, 2007 13:28
Subject: [TenTec] almost OT (involves Omni VI)


I've noticed that with my Omni VI (opt 3) on 40 meters I will clearly hear key clicks from some stations, with what sound like true keying sidebands when they are stronger than S9+10 or so, and keying with a bug or straight key. These clicks or keying sidebands can be 5 khz away and still S9+, and are not nulled by using the 500hz 9mhz filter.

There are some stations where I pick this up even if they are using a keyer...

So...question 1: can the use of a straight key or bug produce keying sidebands or clicks if good solid contact is not being made (as sounds to be the case in this situation); and

Is the Omni VI especially sensitive to the received CW wave form (perhaps due to something in its AGC structure)?

I have listened with AGC fast, slow and off...and these keying sidebands and/or clicks are still there.

So is it me...or just that many crappy signals on 40 meters?

Art, K0RO
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




<Prev in Thread] Current Thread [Next in Thread>