TenTec
[Top] [All Lists]

Re: [TenTec] controlling more than one ten tec radio with onecomputer

To: mark@microenh.com,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] controlling more than one ten tec radio with onecomputer
From: "Paul Gates, KD3JF" <pearly732003@yahoo.com>
Reply-to: kd3jf@arrl.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 22 Aug 2007 02:49:48 -0700 (PDT)
List-post: <mailto:tentec@contesting.com>
I have a 4-bank hub that I use with my laptop and never have had a problem... 
Always work with any kind of software. The hub also had a couple of fans to 
keep the laptop cool.

Paul Gates, KD3JF

Mark Erbaugh <mark@microenh.com> wrote: On Tue, 2007-08-21 at 18:46 -0400, Mike 
Bryce wrote:
> boys...
> 
> I have at last got a computer in the shack.. yea, I know... way to long
> 
> but that being said, there's only one serial port on this used  
> machine. (sister gave it to me. It's running windows ME..)
> 
> Now, is it possible to get a serial port to usb device for each and  
> every rig I have now, then plug the usb cables into a usb hub and  
> select the one that I want?
> 
> I would like to run the argonaut 5, the jupiter, and the RX320 all  
> from the same computer and not have to keep swapping out the single  
> serial port cable I have.

It probably depends on the USB / Serial adapter.  Some USB / serial
adapters work with some software and not with other software. Others may
work with the other software.  There may also be a problem with multiple
USB / serial adapters on a hub. The driver software may map the adapters
to different COM ports the next time you start the computer.  The
drivers I have seen have no provision for hard coding which adapter is
which COM port.  Lastly, I'm pretty sure you won't be able to have
different models or versions of USB / Serial adapaters installed at the
same time. Each requires a different driver and installing one driver
requires removing the other driver.

If you are only concerned with running one radio at a time, consider a
mechanical A-B-C-D serial switch.  They should be available for $10 or
so.  You will probably need some gender changers as most of the serial
switches I've seen use female DB-9's all around, and unfortunately, the
4 output (from switch to radios) are the ones that need to be male.

I use the A-B-C-D switch approach in my shack.

73,
Mark

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>