TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TenTec] Titan 425 troubles, R1 and blown 20a fuses

from [VE1BN] [Permanent Link][Original]
To: geraldj@storm.weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Titan 425 troubles, R1 and blown 20a fuses
From: VE1BN <ve1bn@eastlink.ca>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 21 Jul 2007 19:56:06 -0300
List-post: <mailto:tentec@contesting.com> 
Jerry -
Would it be conceivable that the problem is AFTER the wirewound resistor, and not the caps or the transformer? I had a Titan some years ago. A rectifier broke down so I replaced them all with new ones plus I added .01 caps across each. Never a problem thereafter. I would suspect the problem the gent has is after that wirewound resistor.
73 - Don, ve1bn@eastlink.ca
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TenTec] Titan 425 troubles, R1 and blown 20a fuses, Dr. Gerald N. Johnson
Next by Date:  Re: [TenTec] Titan 425 troubles, R1 and blown 20a fuses, Ken Brown
Previous by Thread:  Re: [TenTec] Titan 425 troubles, R1 and blown 20a fuses, Dr. Gerald N. Johnson
Next by Thread:  Re: [TenTec] Titan 425 troubles, R1 and blown 20a fuses, Dr. Gerald N. Johnson
Indexes:  [Date] [Thread] [Top] [All Lists]