Well, there ya' go! Looks like you're only listening for activity on one
actual 60M channel. Try retuning to the tuning frequencies Jim posted,
below, and give a listen. I just listened in on my Paragon and channels 1,
4, and 5 are busy with strong signals
=Vic=
WA4THR
Subject: Re: [TenTec] 60 Meters
From: "John" <brazos@rochester.rr.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 1 Jul 2007 14:40:38 -0400
List-post: <mailto:tentec@contesting.com>
My OII is set up with the first band staking register to 5.329.400 (b)
5.330.500 (c) 5.332.050 (d) 5.402.600 I am using a log periodic that I
also
use for 75 mtrs and 40 mtrs the antenna worked when I used the jupiter
with
it when 60 first came out . I hear nothing now . the log is up at 70
feet
. Did a reset just to be sure and still nothing . John kb2huk-----
Vic and the Group
I built up this little chart and it's hanging on my console.
Channels "4" and "5" are usually quite busy here in So. Md. Talk to the
U.K a couple of weeks ago!!
-----------------------------------------------------------------------
Channel Nominal Tuning Frequency (carrier)
1 5332kHz 5330.5kHz
2 5348kHz 5346.5kHz
3 5368kHz 5366.5kHz
4 5373kHz 5371.5kHz
5 5405kHz 5403.5kHz (common US/UK)
50 WATTS MAXIMUM RADIATED POWER
ALL FREQUENCIES ARE USB
------------------------------------------------------------------------
Jim/Ke3nK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec