Silly question but did you click the "Start RIP'n" button?
73,
Alan N5NA
Yes, but that's certainly a worthwhile question to ask!!!!!
Hi Dave,
You have to enable 6 UDP ports starting with the base port you define.
So if you pick 49152, then enable the range from 49152 through 49157.
Commands are handled on the port you defined, 49152.
RIP (Radio Over IP, receive audio from radio to PC) is then on 49154.
TRIP (TRansmit over IP, transmit audio from the PC to the radio) is
then on 49156.
Odd ports don't handle RTP.
Enjoy,
73, de KI4JPL
John Henry
Well, that's a total failure in the documentation!
It is probably at the core of some of my issues, and I'll configure that.
Thanks so much!!!
Also, make sure you download the latest One Plug, 1.0.3 just released
yesterday, and have your friend make sure he upgrades his radio
firmware to 1.016. The RIP and TRIP were greatly improved with these
two versions.
John
Ten-tec e-mailed back about 1..0.3, so I was going to try that, but on the
firmware update, I'll get OK from the owner before I try that.
Thanks ***SO MUCH*** the three of you for the fine replies!!!!!!!!!!!!!!
73 Dave WB0GAZ wb0gaz@hotmail.com
###
_________________________________________________________________
Like puzzles? Play free games & earn great prizes. Play Clink now.
http://club.live.com/clink.aspx?icid=clink_hotmailtextlink2
|