TenTec
[Top] [All Lists]

[TenTec] Primarilly an introduction

To: <tentec@contesting.com>
Subject: [TenTec] Primarilly an introduction
From: David Chernenkoff <d_chernenkoff@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 15 Mar 2007 19:59:32 +0000
List-post: <mailto:tentec@contesting.com>
Hey folks,        I'm new around here and I'm new to ten tec equipment.  The 
names David (VE6NHZ) and I'm a newer ham only having been licenced about 18 
months now.  I do have my advanced ticket and because of that an older Ham gave 
me as a gift a Ten Tec Triton IV with matching power supply (252m).  They've 
both been hanger queens for many years and as a result they're in great 
cosmetic shape but pretty poor shape electrically.    I've got the power supply 
up and working with a Yaesu 2800m, and it works fine for the most part but the 
voltage is a little high (~14.5) and I'm getting reports of hum,  So I'm 
thinking that the caps have dried out....I'm gonna poke around in their in a 
few days but for now that's my thoughts.  Any advice would be appreciated.    
And the Triton IV is the other project, I opened it up and poked around and it 
/looked/ fine, but looks aren't everything.  I don't have a mike for it (I'll 
have to find one compatible and make the appropriate adapters) but I fully 
intend to work CW with it as I hear it's a phenominal cw tranceiver.  It needs 
the PTO rebuild and the string indicator seems to have slipped (I'm not sure if 
thats part of the pto rebuild or not)        Questions:            -How 
difficult is it to overhaul this tranceiver? On the surface it seems relitivly 
straightforward (assuming murphey doesn't get his grubby little paws in there) 
but am I underestimating this?            -I was told by the guy at ten tec 
that the service and operators manuals were one and the same, he seemed kindve 
grumpy so I didn't ask but what does he mean by that? Is the required service 
information (calibration, allignment, test point levels etc.) all in the 
operators manual, or is it just an operators manual with schematics?Thanks for 
the information folks and I'll be around the list, I've found so much good 
information here in the past, thank you, I only hope that I can help somehow 
:)-David(VE6NHZ)
_________________________________________________________________
Invite your mail contacts to join your friends list with Windows Live Spaces. 
It's easy! 
http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
<Prev in Thread] Current Thread [Next in Thread>