The baud rate for the Orion is fixed at 57600 baud. And a DOS program does
have a limiot of 9600 baud so I would say you casnnot do it with NA. But CT
looks just like NA and is now free and does have a windows version that
works with the Orion.
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message -----
From: <JBaumgarte@aol.com>
To: <tentec@contesting.com>
Sent: Saturday, December 30, 2006 4:22 PM
Subject: [TenTec] Orion Serial Connection Baud Rate
> I just received an Orion from TT and hope to get it working with my
favorite
> logging program--NA, which I've used since it was first written. I
received
> the following from the program author, K8CC and wonder if anyone has any
> ideas?
>
> Following is paste from K8CC in response to getting Orion to work with NA
> Contesting Program:
>
> I have the official Orion Programmer's Guide which shows what needs to
> be done. It's rather complicated, and appears to share nothing with
> other radios, but that's not the major problem. The problem is, if I
> read the Programmer's Guide correctly, the baud rate for the serial
> connection to the Orion is fixed at 57,600 baud. Note that NA's COM
> ports only work up to 9600 baud. This is because all of my DOS/IBM
> documentation only describe operating the COM ports up to that speed.
> So far, I've not had much luck finding information on how to program the
> ports for higher speeds.
>
> If my assumption from the Programmer's Guide is in error, and the baud
> rate can be throttled back to 9600, please let me know and I'll start
> planning out the Orion code for NA.
>
> End of paste:
>
> If anyone has any suggestions, please advise. Thanks.
>
> John, N0IJ
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|