I believe that Left and Right audio at LINE LEVEL are available off of the
AUX I/O jack on the back of the Orion. (At least they are on my Orion - not
O II)
Using these would require the use of a small stereo amp and the construction
of an appropriate 8 pin DIN plug - yuck!
Also, I would think that these inputs would not mute when the main audio is
muted or the earphones are plugged in??
73,
Rick
VE7TK
Website: http://www3.telus.net/ve7tk
-------------------------------------------------------
Subject: Re: [TenTec] Orion II question
From: joel hallas <jrhallas@optonline.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 30 Dec 2006 14:46:02 -0500
List-post: <mailto:tentec@contesting.com>
John,
I think I remember that the split audio is only available out the front
headphone jack?
If so, it would probably take a small stereo amp and then you'd be in biz.
GL & 73, Joel
Joel R. Hallas, W1ZR
John wrote:
>Hello All Merry Christmas and Happy New Year ! I just got a Orion II and
>have a question . I now have two ten tec speakers and I would like to use
>them both for a stereo out put . Both working when on vfo 1 and both
>working when on vfo b . I tried putting a stereo splitter into audio out
at
>the rear panel and run audio to each speaker from the splitter but I can
only
>get one to work ? the audio menu shows vfo a
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|