Hi I had a similar problem when using my ORION and the ALINCO PS,
Also some ASTRONS with poor internal grounding can cause problems.
Also RIGBLASTER ( Type)
power strips. TT also recommends having power leads no longer than 3 feet.
The ALINCO also caused my ts-2000 to freeze. I've also had problems
when using crimp
connectors not done well.
2.059d seems so far to be OK fer me.
Hope this helps -- 73's Ray W1JUS
On 10/22/06, Danny Shaver <n5nbk@nortexinfo.net> wrote:
I have an Orion1 running 2.059d. I have not used it mmuch due to work
schedules, but this afternoon I noticed that after a while of operating, the
control panel freezes up. The rig is still working when this happens, I just
cannot change anything since none of the controls work. I performed a master
reset, but it still happens. I turn the rig off and back on, and everything
works fine for a while. Anyone else experience this ? Any ideas ?
Danny N5NBK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
--
The joy is in the journey...
Mary Ann Higgins
|