TenTec
[Top] [All Lists]

Re: [TenTec] Orion 28 Mhz noise

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Orion 28 Mhz noise
From: "Ron Castro" <ronc@sonic.net>
Reply-to: Ron Castro <ronc@sonic.net>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 20 Oct 2006 08:33:01 -0700
List-post: <mailto:tentec@contesting.com>
My first thought also would be a switching power supply, but just to make sure it's not something internal to the Orion, I would disconnect all antennas from the radio and see how the effects the noise on the other receivers in the shack. It's possible that the antenna connection to the Orion could be radiating the power supply noise, so that has to be taken into account too.

I'll put my money on the power supply!

Ron Castro
Chief Technical Officer
Results Radio, LLC


----- Original Message ----- From: "Martin AA6E" <aa6e@ewing.homedns.org>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Cc: <orion565@yahoogroups.com>
Sent: Friday, October 20, 2006 7:30 AM
Subject: Re: [TenTec] Orion 28 Mhz noise


bob finger wrote:
My Orion has decided to generate some noise on ten meters.  The receiver
has frying hash at about 30 over 9, rendering the receiver useless.
Other receivers in the shack have NO noise on ten unless the Orion is
powered up....yes the noise generated by the Orion can be heard in other
receivers.  Orion is dead quiet on 12 and below.  Anyone else ever
experience this and found a cure before I trouble the good folks at
TenTec with this one?  thanks.  73 bob de w9ge

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

Bob,

Why do you think it is the Orion?  Could it be the power supply?
Something else in the shack?  Does transmit work normally?

73 Martin AA6E
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




<Prev in Thread] Current Thread [Next in Thread>