Re: [TenTec] Audio distortion in Omni VI(standard),

[ron <roncasa@verizon.net>]

You are not clear as what your problem is.

What began your journey by "pulling connector 67" ?

Ron, wb1hga

k8vf_mark@centurytel.net wrote:
> I pulled connector 67 in the noise blanker line to remove the noise blanker 
> control, in case the pot was shorted.
> It had no effect.
>
> In fact the noise blanker has litle or no effect at any time. I see that 
> this was a common complaint.
> Also pulled the pulse line, but it is apparent that the noise blanker is not 
> causing the distortion.
> It is not unreadable, just "there" and I wondered if anyone had experienced 
> it? (and if there was a fix).