Here are the characteristics of the aux audio outputs in my O1 v2.059, with
main rx feeding right line output and subrx feeding left line output:
SSB,CW
1. L&R line outputs are variable for first 50% of AF; increasing past 50%
results in increasing attenuation of opposite output - in other words L
output increases as I increase Main AF to 50% and then R output decreases (L
output constant) as I go past 50% on Main AF and vice versa for increasing
Sub AF
2. R output (subrx) is 3dB lower than L output with equal settings on both
rx
RTTY,AM
1. operates same as SSB,CW
2. R output is equal to L output with equal settings on both rx
73,
Barry N1EU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|