The Omni VI setting will not work for the Orion regardless of the baud
rate. The commands are totally different.
73,
Alan N5NA
RM wrote:
> John,
>
> Change the Baudrate from 1200 to 57000; I highly recommend that you manually
> change the computer's serial port to these settings also (I have found that
> serial ports tend to be more 'responsive' when I set them instead of the
> computer).
>
>
> Ron/NU1U
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of John Muzyka
> Sent: Saturday, July 01, 2006 09:08
> To: TENTEC
> Subject: [TenTec] Orion Comm Parameters
>
> Hi All.
> As a new owner of a Orion 2 and getting used to it all the time, I am
> wanting the rig to work with Turbolog 4 but not having much success, there
> is no template with the logging programme for Orion 2(may in 12 months we
> will get one) but there is one for the Omni-6 which does NOT work, I have
> the ORION working with Writelog no problem.
> I have these settings for it so far
> Baudrate 1200
> Databits 8
> Stopbits 1
> Parity N
>
> Can anyone confirm these for me ??
> Cheers]
> John G4RCG
>
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|