Ron Castro
Chief Technical Officer
Results Radio, LLC
----- Original Message -----
From: <k6kdk@k6kdk.net>
To: <tentec@contesting.com>
Sent: Monday, March 20, 2006 8:39 PM
Subject: Re: [TenTec] [Orion] O2 Tx audio quality
> ----- Original Message -----
> From: "Ronald Gorski" <R.Gorski at Astronautics.com>
> To: "Ron Castro" <ronc at sonic.net>
> Sent: Monday, March 20, 2006 10:30 AM
> Subject: Re: [Orion] O2 Tx audio quality
>
>
>>>I heard another O2 user over the weekend who's audio sounded distorted,
>>>but since I was just getting ready to leave the house I didn't have a
>>>chance to talk to him. If I run into him again (he's usually around on
>>>75
>>>at night) I'll see if I can get an idea about what might be causing his
>>>problem, and report it back here.
>>
>> Please do. I think there are more of us out there. I am starting to think
>> that there may be a hardware problem with the audio board.
>> 73, Ron
>>
>>>Ron N6AHA
>
> Ron, Yes, there are more of you out there.. I just had QSO w/ N9AU
> running a O2 (worst audio I ever heard!), last night QSO w/ W6FE, with
> same breakup on peaks, he was also running O2. This is exactly same audio
> break up you get if you run an O1 and load Ver 2.055. But of course if
> you have O1 you just cure it by going back to Ver 1.371, if you have O2 I
> don't know what you do about it. Most are handling the frustration by
> talking themselves into... "must be some sort of RF in the shack"..
> hihi...
>
> -Dan
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|