TenTec
[Top] [All Lists]

Re: [TenTec] Paragon mic

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Paragon mic
From: Robert & Linda McGraw K4TAX <RMcGraw@Blomand.Net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 15 Feb 2006 17:20:40 -0600
List-post: <mailto:tentec@contesting.com>
And the major loop problems can be easily with some de-soldering, cleaning of the leads and pads, and re-soldering.

It seems that the components aged on the shelf and thus the leads oxidized and/or the bare copper boards were inadequately cleaned before soldering. This leads to problems in future years.

Cleaning and re-soldering fixes it permanently.

73
Bob, K4TAX

----- Original Message ----- From: "Jim Weisz" <k2np@lycos.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Wednesday, February 15, 2006 8:17 AM
Subject: Re: [TenTec] Paragon mic


Following along with this thread, I would like to add that my experience with the TT705 mic has also been excellent.. The combination of the 705mic and my Paragon, have always resulted in reports of "excellent" audio.., and most often as Vic,WA4THR had
stated, these reports were unsolicited...
Enjoy your Paragon, its an awesome radio.. just be aware of the typical PLL problems
on the major loop board...
                                      73, Jim K2NP

----- Original Message -----
From: "Vic Klein" <vhklein@ptd.net>
To: tentec@contesting.com
Subject: Re: [TenTec] Paragon mic
Date: Tue, 14 Feb 2006 11:05:11 -0500


I have a Shure 444 that I used on my old Triton, but an Argonne AR-57
dual-element crystal mic always got better reports. On my Paragon I use a
TT-705 and get unsolicited compliments on the transmit audio.

=Vic=
WA4THR

> Hi,
> I have a pargon I on the way and would like to know
> what mic has recieved good results with it. I own a
> heil goldline with a swithchable hm-4 cartridge.
> also a heil hm-5 element mic and and a ten-tec hand
> mic that came with my 526. before buying an adapter
> cable to go with my heils or buying a stock tentec
> 706 i would like to know what other people have
> found to work well with their paragons.
>
> TNX,
> Larry N1YW

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




--
_______________________________________________

Search for businesses by name, location, or phone number. -Lycos Yellow Pages

http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




<Prev in Thread] Current Thread [Next in Thread>