Re: [TenTec] Orion II tuning questions

[Alan Sewell <alan.n5na@gmail.com>]

David,

If you don't have much of a "flywheel" effect you need to loosen the 
tension on the knob.  You may even have to loosen the knob on the shaft 
and slide it out a little to lessen the tension enough.
With a good flick of the tuning knob I can move 23 - 24 KHz on the 10Hz 
tuning step setting.
73,

Alan  N5NA


David H. Walker wrote:
> Just a nice smooth control but not much of a "flywheel" 
> effect!
> 73
> David
>