Toby,
When you used the Rascal interface with your Argonaut, did you use the
Ten-Tec cable that plugs into the DIN connector on the rear panel? I have
not had success in getting mine to work without an interface. I have a
Signal link now but the Argonaut is back in the Ten Tec shop for other
issues. Hmmm, maybe they were related.
If you could let me know how you configured yours, I would be very
interested in hearing about it.
Bill
VE7BER
I bought an Argo V last month and is it a really good rig on cw and
> psk. I use a Rascal Interface and use that for computer digital modes.
> The
> Argo V has excellent receive audio and is not far behind the Orion in that
> respect.
>
> The only problem is the transmit SSb audio is not very good. I have tried
> several mikes without much luck, and would like to see some improvement in
> this area. The audio is very thin and has no presence at all. The bass
> is
> totally gone with not much mid-range either, mostly highs in the audio.
>
> If anyone knows something that can be done to improve the audio, I would
> like to get that information please. I am using 1.08 and I assume the
> hardware mod was done as I bought the rig new last month.
>
>
> Toby W4CAK
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|