These sound like problems with CT. The filter commands for the Omni VI are
sent as an option byte as part of the mode command. It sounds like CT is
sending both a new frequency command and a mode command with filter option
to the Omni VI. These things can only be fixed in CT. Is the CT you are
using an old version? If you use WriteLog, you won't have any of these
problems. I also suggest N1MM as a good program if it supports the Omni VI.
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Ken Brown" <ken.d.brown@verizon.net>
To: <tentec@contesting.com>
Sent: Saturday, December 17, 2005 5:41 PM
Subject: [TenTec] [Fwd: [ct-user] CT DOS with Ten-Tec Omni VI]
> Hi all,
>
> I posted this question to the ct-user reflector. Some or all of it is
> Ten-Tec specific questions, so I am posting here too.
>
> When interfacing with my Omni VI, recording of the rig frequency by CT
> is the most important part of the RS-232 communication for me.
> Controlling the frequency of the rig from CT is much less important,
> because I would rather turn knobs than push buttons. Even so, it would
> be nice to have the control of the radio work a little more
> conveniently.
>
> When I enter a frequency into the callsign field in CT the
> rig does go to that frequency and it also turns off whatever 6.3 MHz IF
> filter selection I had made, and it turns off the N-1 9 MHz IF filter.
> Strangely, if the N-2 9 MHz filter is selected, it does not turn that
> off. Is there a way to edit the data stream sent to the radio by CT, so
> that I can control the radio frequency without changing the filter
settings?
>
> More details: Only the receiving VFO frequency is changed if operating in
> split mode. If transmitting nothing happens at all.
>
> I cannot find any information in my Omni VI manual about RS-232 control
> of filter selection. If the radio is not in CW mode the mode may be
changed.
> If in USB it will change to LSB. If in FSK it will change to CW on the
second
> new frequency command. If in FM mode is not changed.
>
> DE N6KB
>
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web: http://www.k1ea.com/
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|