Re: [TenTec] Centurion- bias transistor

["Henry Pfizenmayer" <pfizenmayer@worldnet.att.net>]

UPDATE : Yep another blwn bias transistor - second since about April.

Also appears the HV is OK at about  3145 V no load as measured with an 
external Fluke  DVM , so metering is messed up again.

What I would like to know is what is others experience with bias transistor 
failures ? Bad 3-500 ???

 Hank K7HP


 Centurion readings after  a POP
>
> Resting plate current at first division - about 70 ma.
> Plate voltage only 2000 volts and transformer hum sounds like the supply 
> is loaded heavily but showing only the 70 ma on the plate meter.
> No grid current
> No fwd/reflected power
> No difference in standby or operate
> No difference QSK or PTT /VOX
>