It's not a quirk. It's a feature. The software will
mute the mic for you when playing a wav file through
the aux port. That way you don't need to buy a
rigblaster type box.
I own an Orion. I made the code work that way to avoid
extra equipment.
73,
Tom Wagner - N1MM
Check out the N1MM Free Contest Logger at:
http://www.n1mm.com
http://groups.yahoo.com/group/N1MMLogger/
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Jim Denneny
Sent: Monday, October 17, 2005 12:20 PM
To: tentec@contesting.com
Subject: [TenTec] Orion & N1MM Logger
I ran into a problem sending WAV files from N1MM Logger through my Orion
while setting up for CQWW SSB contest. Joe Subich W4TV solved it. I have a
MicroHAM MicroKeyer between my PC and Orion.
It was necessary to port the WAV files through the rear AUX port leaving the
MIC ported to the front panel MIC in. This was accomplished by setting a
custom audio setting of CBA within the MK. Now it works.
I am told this is a quirk peculiar to Orion.
Jim K7EG
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|