TenTec
[Top] [All Lists]

[TenTec] FS: SGC MAC-200 Master Antenna Controller/Tuner

To: <TenTec@contesting.com>
Subject: [TenTec] FS: SGC MAC-200 Master Antenna Controller/Tuner
From: "Jim Sheldon" <w0eb@cox.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 5 Oct 2005 13:42:54 -0500
List-post: <mailto:tentec@contesting.com>
I have for sale, one SGC MAC-200 Auto-Tuner/Master Antenna Controller.  This
unit was purchased new in June 2005 from AES for $249.99 plus shipping.  It
functions perfectly, and has some neat features not found in other tuners.

It only pulls about 250 milliamps from a 13.8VDC supply, it will work with
1.5 to 200 watts PEP and tune antennas (coax, balanced line or long wire)
from 1.8 to 60 MHz.  It will switch up to 5 antennas to the rig, and has
ports for 1 Long Wire, 1 Balanced Line and 3 Coax feeds on the back.  Once
you select an antenna for a given frequency, when you return to that
frequency, and apply RF, the unit automatically switches to that antenna and
tunes for minimum SWR.  It remembers settings for that frequency, and if the
antenna hasn't drastically changed since the last time, it switches & tunes
in about a second.

I have the original sales receipt and manual, but do not have the original
box.  It can be powered from a wall-wart, but SGC recommends powering it
from the same supply you power the radio from as all antennas are
automatically disconnected when power to the MAC-200 is turned off.

I'm asking $200 plus $15 shipping (USPS Priority Mail, insured) to anywhere
in the US.

Jim - W0EB
Wichita, KS
w0eb@cox.net
316-744-3022

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] FS: SGC MAC-200 Master Antenna Controller/Tuner, Jim Sheldon <=