Re: [TenTec] Mikes for old tentecs

["w a lindsay-smith" <g3wni@btinternet.com>]

Very Many thanks Mike.  Your help much appreciated.  Did what you suggested, 
got thru' OK and placed the order.   Waiting delivery now.

Kind regards and 73  Bill.  G3WNI

----- Original Message ----- 
From: "Mike Hyder -N4NT-" <n4nt_m_o_hyder@charter.net>
To: "w a lindsay-smith" <g3wni@btinternet.com>; "Discussion of Ten-Tec 
Equipment" <tentec@contesting.com>
Sent: Saturday, August 06, 2005 10:43 AM
Subject: Re: [TenTec] Mikes for old tentecs


> Hello, Bill--
>
> Suggest you go to www.mouser.com and in the search box enter 25LM022
>
> Mouser is an excellent company and seems to appreciate all orders, not 
> just
> large ones.
>
> 73, Mike  -N4NT-
>
> ----- Original Message ----- 
> From: "w a lindsay-smith" <g3wni@btinternet.com>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Saturday, August 06, 2005 4:43 AM
> Subject: Re: [TenTec] Mikes for old tentecs
>
>
> Steve,
>
> I have a Shure 401A hand mic now defunked and been looking for a mic for 
> my
> new TT Argonaut V.  Your suggestion seems just the answer to my problem. 
> I
> sent the mic to Shure for repair but no joy, it is out of production and 
> no
> spares.
>
> Could you please send me details of  Mouser, whom I know nothing about,so
> that I can make contact to buy the part you recommend.  I will use the 
> Shure
> 401A case to hold the insert.
>
> I use a rather old Shure 444 on my Omni V1 and also on my previous Drake C
> line.  As this is getting on I'm looking for a back-up.
>
>  Kind regards and 73  Bill.  G3WNI
> g3wni@btinternet.com
>
> ----- Original Message ----- 
> From: "Steve Ireland" <vk6vz@arach.net.au>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Saturday, August 06, 2005 1:23 AM
> Subject: Re: [TenTec] Mikes for old tentecs
>
> > G'day
> >
> > For anyone who is looking for a REALLY cheap and excellent quality high Z
> > microphone for a older Ten Tec transceiver, Mouser sell a Kobitone 
> > crystal
> > cartridge for about $7 (part number 25LM022).  Simply buy a dead
> > microphone
> > casing that you like at a Hamfest and drop one in.
> >
> > I use one on my Drake T4XC and it sounds as good as an old Shure 201
> > microphone that I have.
> >
> > Vy 73
> >
> > Steve, VK6VZ
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec