> Forgot to add if the receive signal is very strong, I set the
> RFG for something less than S9.
>
> What else did I forget? :-)
>
> -Lee-
>
>
> On 16 Jun 2005 at 10:34, WA3FIY wrote:
>
>> The "pop" can be reduced by judicious use of the RF Gain
>> control. I usually set my RFG so the S Meter is just a little
>> bit off the peg. I can hear any signal that is above the
>> atmospheric noise level and the inter element noise on transmit
>> is low and easy on the ears.
>>
>> -Lee-
>>
Also consider changing the IC Op Amp in the AGC circuit. I think I
liked the TI TL072 or 82. I'd have to look inside the rig to confirm
what's there. This not a 100% cure but I found it to help on all but
the strongest signals. FWIW Dave AB0N (Rig TT Omni-A)
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|