Buy the Cannon XLR connectors and make you own. No big deal. I do
professional audio sound systems. How long you need the cable. I'll send
you some wire. Might even have connectors installed when you receive it.
Seriously, give me some information on configuration of the connectors. I
seem to recall the Heil Studio 1 has a 3 pin XLR connector for output.
What's needed on the other end and how long you want it?
To all,........... I'll make them all day for a very reasonable price and
ship them to you.
73
Bob, K4TAX
----- Original Message -----
From: "Duane A Calvin" <ac5aa@juno.com>
To: <tentec@contesting.com>
Sent: Tuesday, June 07, 2005 12:31 PM
Subject: [TenTec] Long mic cables for Studio 1 on boom
> Over the last week or so I've purchased a Studio 1 microphone and a Heil
> boom to get the microphone up off the desk top. (I keep smacking the
> desk mic when reaching for the key - hi!) Anyway, long story short, the
> cable with the mic is only 5 - 6' long, about 3' short of what it needs
> to be to run from the mic, along the boom, and then across to the rig.
> For those of you who have this kind of arrangement, how did you solve
> this problem? Did you build your own cable from Heil wire? I emailed
> Heil and got a terse, three word reply from Bob - "Sorry, no
> 'extenders.'" I'm thinking I'll build my own cable, but would like to
> hear from others what they chose to do and how it worked for them.
>
> 73, Duane
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|