Hi Duane etal:
I bought "Heil wire" mic cable to redo my boom HM-10 , that was equipped
with the orginal cable from Heil. The original cable was pretty poor from a
shielding/seperation point of view. I had some RF feedback problems I traced
to the cable. The new cable Heil sells is super! The connectors are easy to
wire. Cable aint cheap but Its certainly my choice for mic cable.
73 de Dean W5PJR
Tijeras, NM
----- Original Message -----
From: "Duane A Calvin" <ac5aa@juno.com>
To: <tentec@contesting.com>
Sent: Tuesday, June 07, 2005 11:31 AM
Subject: [TenTec] Long mic cables for Studio 1 on boom
> Over the last week or so I've purchased a Studio 1 microphone and a Heil
> boom to get the microphone up off the desk top. (I keep smacking the
> desk mic when reaching for the key - hi!) Anyway, long story short, the
> cable with the mic is only 5 - 6' long, about 3' short of what it needs
> to be to run from the mic, along the boom, and then across to the rig.
> For those of you who have this kind of arrangement, how did you solve
> this problem? Did you build your own cable from Heil wire? I emailed
> Heil and got a terse, three word reply from Bob - "Sorry, no
> 'extenders.'" I'm thinking I'll build my own cable, but would like to
> hear from others what they chose to do and how it worked for them.
>
> 73, Duane
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|