MixW will nearly every digital mode including BPSK31, QPSK31 and FSK31. i
have had no problem using MixW with ICOM and TenTec rigs. my interface is
simple for ICOM also: an isolation transformer in series with 50K ohm volume
control in both lines. one can set the input/output to whatever he needs
that way. for the Orion i simply use the included cable that runs directly
to the sound card from the back of the Orion.
you can download MixW from the MixW site and give it a try free.
good luck jack
----- Original Message -----
From: "J. Reed" <jhreed@chilitech.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, June 04, 2005 9:36 PM
Subject: Re: [TenTec] Argonaut V and PSK-31
> Jack, thank you for coming back so fast...
> I am trying to run BPSK as used in the
> program HamScope. This might NOT be
> the same as a packet program PSK31 so I'm
> again asking for your help IF I'm trying to
> do something different... thanks, Jim Reed.
> ----- Original Message -----
> From: jack
> To: Discussion of Ten-Tec Equipment
> Sent: Saturday, June 04, 2005 23:27
> Subject: Re: [TenTec] Argonaut V and PSK-31
>
>
> MixW is my choice of all i have tried, jack ak7o
>
> ----- Original Message -----
> From: "J. Reed" <jhreed@chilitech.net>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Saturday, June 04, 2005 8:26 PM
> Subject: Re: [TenTec] Argonaut V and PSK-31
>
>
> > Hello, I'm just now getting interested in running PSK with my TenTec
> 550
> >
> > anyone having great results with a particular program? Thanks, Jim
> Reed.
> >
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|