I use the filters wide open
This lets me see everything from .0702 to .0730
Some psk programs allow many of the signals to be monitored all at once. I
really like seeing multiple conversations all at once.
Where the 'narrow' comes in nicely is on the Orion, when there is a near by
signal that wipes out the rest of the signals. Using the Narrow filters
there with the Orion will allow the desited signal to pass. the Jupiter
would just not receive any of the other signals even with the narrow DSP in
that situation.
Best wishes,
Rich
K5SF
>From: <kjs14@iglou.com>
>Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>To: tentec@contesting.com
>Subject: [TenTec] PSK31
>Date: Wed, 01 Jun 2005 17:55:28 -0400
>
>I use both the Jupiter and the Orion for PSK31. I
>only work the 20 Meter band and use USB with a
>soundcard. I have been setting the TX FILTER BW
>at the most narrow setting because of PSK31's
>narrow (31hz) width. This only allows me to use
>approx the first one third of the waterfall for TX.
>
>I have read that normal SSB settings are correct
>and then I read in another manual that TX BW
>should be set according to the digital mode in use.
>
>So what setting is correct for the Jupiter and the
>Orion???
>
>73 es Tnx Ahead,
>John / KG4WNA
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|