I just purchased a "new" Omni V. I'll be getting the matching power
supply
and adding all the optional filters over time. However, I wanted to ask
for
some guidance and learned opinions from the group.
This one is serial number #94A10059. I assume this means it was rig
#10059,
and it was manufactured in 1994. Is this correct? Where does this one
fall
May 1989
on the total list of Omni V's manufactured? Are there any particular
"issues"
with this vintage Omni that I should be aware of?
No RIT is the main drawback. IF hiss can be anoying.
I'm aware that N4PY has a V.9 mod. What are the pros/cons? Is it worth
the
effort? I don't need direct keypad entry of frequency or use memory
storage
much. As far as I can tell, it isn't worth the effort (for me). However,
the
spotting feature would be nice ...
Still won't have RIT. Do you want computer interface with this oldie?
I'll be adding one 9mHz filter for CW. Should I get the 500 Hz or 250 Hz
filter?
Get the 500hz. Using the 250hz, the IF hiss will drive you bonkers. Lot of
extra attenuation too.
Is the FM board still available anywhere?
Seriously doubt it .
I'd like to be able to adjust power output down to less than 5 watts using
the front panel control. Is there a tuning procedure or separate mod to
accomplish this?
I've seen it done. Do a Google search. I don't recommend it however. You'll
just frustrate those trying to hear you. The real heros in QRP are the QRO
stations straining their poor ears.
TIA/73, Jim K5HO
---------------------
Nunquam Secundum
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|