Hi Charles.
Look in the middle of the screen near the left,
Do you see a "DSP Fail" text or anything like that? It looks so similar to
other text you might miss it..
If so, It could be either a firmware issue, or you could have a Logic board
failure.
Best wishes.
Rich
K5SF
From: "Charles Chandler" <charles_chandler@comcast.net>
Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
To: <tentec@contesting.com>
Subject: [TenTec] Orion display freeze
Date: Sat, 14 May 2005 19:42:12 -0500
I have been playing with my new Orion for a few days now. I am running
TRX-Manager and have found that when I have the TRX Monitor window open
after a few minutes the Orion screen will freeze and not update. I can QSY
and the rig changesd frequency and the TRX Monitor window shows the new
frequency, but the Orion screen remains frozen. I can also change filters
and modes without the Orion screen changing.
I posted this to the TRX list and one other user of TRX and Orion had the
same problem. The software author thinks it may be related to a too-fast
polling rate and I was wondering...
- Has anyone else had this problem?
- Has anyone else had a similar problem with other logging/rig control
programs?
I'll give Ten-Tec support an email and see what they think as well.
73,
============================
Chuck Chandler
WS1L
charles_chandler@comcast.net
============================
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|