TenTec
[Top] [All Lists]

Re: [TenTec] FS: Omni VI Option 1 chips...

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] FS: Omni VI Option 1 chips...
From: Jim Lowman <jmlowman@sbcglobal.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 30 Apr 2005 19:29:32 -0700
List-post: <mailto:tentec@contesting.com>
Duh!  I should have looked at the subject line!

Okay...the problem is as follows: 

Don Rasmussen wrote:

>Re: [TenTec] FS: Omni VI Option 1 chips...
>
>Too bad these sold so quickly!!!
>
>Taken from the E auction site:
>  
>
>TenTec Omni 6 Model 563/ This is a Ten Tec Model 563
>Omni 6 Amateur Radio Service Transceiver with a Ten
>Tec #936 22a Power Supply, a #700 Hand Mike, and a
>#301 Remote Knob. This radio has been modified to
>include the so-called "Option 1 Plus/DSP upgrade." as
>supplied by TenTec. It is therefore virtually
>equivalent to a Model 564 Omni 6 Plus. Cosmetically
>this transceiver is a high 9 on a 10 scale,
>Operationally this radio is a 10. . Also ncluded with
>this rig are the 1.8 KHz SSB and the 500 Hz CW
>filters, and the internal voice module that speaks the
>frequency of the active VFO. The 22 amp Model 936 Ten
>Tec Power Supply was purchased along with the radio.
>This is a true "Plug and Play" offering.. Also in the
>package is a 'Y' harness that allows use of the Model
>301 control knob along with control software (not
>included) that may be plugged into the DB25 receptacle
>on the back of the rig. This harness was designed at
>Ten Tec and built by this seller. The Ten Tec drawing
>is included along with other pertinent Ten Tec
>documentation. Thia auction includes the radio, power
>supply and items noted above. Buyer is to pay shipping
>expenses. Payment is to be made using PayPal, or a
>cashier's check in US Dollars drawn on a US Bank, or
>by USPS money order..Seller will determine shipping
>cost after auction closes and will communicate same to
>buyer.
>  
>
>
>Subject: [TenTec] FS: Omni VI Option 1 chips...
>
>I have the 2 chips that will change your 563 Omni VI
>into the Option 1 upgrade....if I can change these,
>anyone can...simple plug in...NO soldering 
>
>  
>
Per the rules of the list, there is to be *NO* reference to auctions or 
auction
sites.  This caused any further messages from you to be held for my 
approval.

73 de Jim - AD6CW



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>