Re: [TenTec] Argo V mod and V 1.08

["B.Lee Cornwell" <k2blc@earthlink.net>]

My V 1.08 is definitely less "touchy" on the mic gain. I have a first 
production run that was back to the factory several months ago for the 
up-grade. My MINIMUM out-put power is as follows:
80 mtrs 1.5w
40 mtrs 1.5w
20 mtrs 1.4w
15 mtrs 1.3w
10 mtrs 1.0w
(dummy load and Bird 4410 watt meter)
73
B. Lee Cornwell
http://home.earthlink.net/~k2blc/index.html

----- Original Message ----- 
From: "Rick Williams" <rick.williams@telus.net>
To: "TenTec List (TenTec List)" <TenTec@contesting.com>
Sent: Tuesday, February 01, 2005 7:31 PM
Subject: [TenTec] Argo V mod and V 1.08


Well Vince here's what I've gleaned about 1.08 over the last 2 plus months.
The factory has indicated to me that the mod works in conjunction with the
firmware upgrade.  That said, the mic gain is significantly less "touchy"
after the mod even with firmware 1.07.

My guess is that the main impact of firmware 1.08 will be on the low power
output side.  Those using 1.08 indicate that they can get the output down to
1 watt on all bands (this is an issue with the current hardware/firmware
configuration).  T-T may also have "tweaked" the speech processor algorithm
to improve it.  But I'm just guessing --- and hoping.

I hope this helps.

73,

Rick
VE7TK

Website:  http://www3.telus.net/ve7tk



--------------- ORIGINAL -----------------
Date: Tue, 1 Feb 2005 16:29:20 -0500
From: "Vince Santis" <vsantis@earthlink.net>
Subject: [TenTec] Argo V mod and V 1.08
To: "Tentec" <tentec@contesting.com>
Message-ID: <000001c508a5$1a2ab640$5ae9f504@DJWXQ541>
Content-Type: text/plain; charset="us-ascii"

What is the mod for the Argo V and what does it fix, improve or add? Thanks,

Vince Santis, N1VS
Winsted, CT 06098


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec