Hi Tim...when I got my corsair II a decade or so ago, if I recall I couldn't
get my bug to work with the 1/4 stereo jack either...seemed to recall it had
something to do with the keyer speed dial or it wasn't doing what I expected
it to.
Find a cw qso and see if the spot button drops it to a much lower tone...if
it does, then it is probably functioning normally.
----- Original Message -----
From: "Tim Logan" <nz7c@cox.net>
To: <tentec@contesting.com>
Sent: Wednesday, December 29, 2004 9:18 PM
Subject: [TenTec] Corsair II - one more "problem"
My "new" Corsair II is confusing me in two areas: 1) I can not get it to
respond to my paddle when connected to the 1/4 stereo jack for the
internal keyer and 2) the spot tone does not seem to function - when I
depress it all I hear is a slight change in the background noise.
Otherwise the receive, cw and ssb ix excellent (pretty impressive) and it
puts out 100 watts easy when I hit the lock position. I'm no techo at
all - can some one try to guide me in the right direcetion?
Thanks again.
73/Tim NZ7C
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|