I tried this with a friend of mine this morning, he didn't notice anything
strange in the CW enveloppe. Now, he was listening to me with an SGC 2020
with ADSP2 and a Yaesu FT-7B ! :-) Of course these rigs are not in the same
class as the MArk V, so I can't tell exactly.
A sophisticated rig is not necessary, or even desirable for listening to
the quality of a transmitted signal. The most basic receiver, with the
monitored signal attenuated sufficiently, and no AGC, is the best. A
direct conversion receiver using a real clean local oscillator and no
amplifiers or filters, except in audio stages, is the way to listen for
TX signal quality locally.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|