Yrham@aol.com wrote:
>Do
>you use the HC 5 element, and if so, how is the xmt audio? Also, if you
>have any recommended "starting points" for setting up the xmt audio, I'd
>appreciate it.
The Orion xmit audio is fine with the Heil HC5. The Orion is really quite easy
to setup for ssb xmit and the monitor does quite a good job so you can just
make adjustments while transmitting into a dummy load and judge for yourself.
For non-hifi applications, you can use a xmit bandwith around 2400hz, a low
frequency rolloff of 200 or 300hz, and play with the TX EQ till you like the
sound (typical values -8 to -15dB). Adjust mic gain so the LED blinks on voice
peaks, like other Ten-Tec rigs. If you want to use compression, try values of
3 to 5.
73,
Barry N1EU
__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register
Netscape. Just the Net You Need.
New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|