On Thu, 26 Aug 2004 w7kxb@comcast.net wrote:
> I am using my S1 mic on a Jupiter and Argonaut V and have received
> reports, which I confirmed with a local receiver while transmitting into
> a dummy load, that the audio is void of any high frequencies. Both
> rig's sound great with either the Heil boom mic or the TT705. Has
> anyone out in radio land experienced a similar problem with their S1?
The TX audio offset (near the very bottom of the MNU list) should be set
at around 400 or 500Hz with the Studio One on a Jupiter. Experimentation
is required for the best audio to match your particular voice AND because
of proximity effect being a half inch or 3 inches from the microphone.
73 Jason N1SU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|