No, the Paragon I does not have AM transmit capability in the hardware.
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Bruce Sugarberg" <bsugarberg@core.com>
To: <tentec@contesting.com>
Sent: Tuesday, August 17, 2004 2:23 PM
Subject: Re: [TenTec] Differences in Paragon I and II?
> Hello,
>
> Does the Giehl chip allow you to transmit AM?
>
> 73, Bruce WA8TNC
> ====================
> Vic Klein wrote:
> > Good comparison. Note that by substituting a Giehl chip for the original
> > chip in the PI (a simple plug-in install) you get the band-stacking
> > registers and one-touch changing to any band as well. This is a
worthwhile
> > inexpensive upgrade and is still available.
> >
> > =Vic=
> > WA4THR
> >
> >
> >>Computer logging is definitely possible with the Paragon II. The
Paragon
> > II uses an Icom CIV computer interface just like the Omni VI. The main
> >>difference between the PI and PII is the PII has band registers and in
> >>general a much nicer user interface. Functionally, the two are about
the
> >>same except the PII has transmit AM although the transmit AM is USB or
LSB
> >>with a carrier added. You can control which sideband you transmit on AM
> > but you can't transmit both sidebands. On AM it transmits just like
CHU.
> > CHU transmits USB with a carrier.
> >
> >>Carl Moreschi N4PY
> >>Franklinton, NC
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|