TenTec
[Top] [All Lists]

Re: [TenTec] vertical radials

To: tentec@contesting.com
Subject: Re: [TenTec] vertical radials
From: ac5e@comcast.net
Reply-to: tentec@contesting.com
Date: Mon, 07 Jun 2004 20:43:45 +0000
List-post: <mailto:tentec@contesting.com>
Actually, if you measure the current along an on-ground radial you will find 
there's virtually no current flowing in the radial much beyond the 1/10th 
wavelength point. And the current falls off even faster in a buried radial. 

Earth is essentially a dialectric, making a buried radial a conductor with an 
indeterminate but  fairly low propagation velocity.  Indeterminate because 
there are too many variations in even a short length of dirt to pin down.  But 
the bottom line is a physically short radial will be electrically long. 

If you are going to elevate a radial system that's another matter but 60 feet 
for Top Band will do just about everything that can be done for the radiator. 
But since what you think has an effect on how well our toys play; if you feel 
industrious and don't mind lightening your wallet a bunch more there's nothing 
wrong with planting longer radials; or in planting a dozen long radials and 
keep the rest down to the tenth wave or so length.  Or even 120 full quarter 
wave radials.

If you insist on #14  copper, and full length radials, you are looking at, off 
the top of my head, just about 200 pounds worth.  And I just got a notice today 
the price of copper has gone up. Which made an order for brass a few hundred 
more than the April quote. Oh well!  

But personally, and seriously,  If I were serious about Top Band I would put 
down the shorter radials with a Rohn 25 base - and start accumulating 14 or 15 
sections of 25 to replace the Hy Tower later.  It will work better than 
anything you can do with the shorter tower. 

73  Pete Allen  AC5E


--
Never squat with your spurs on



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>