Re: [TenTec] Yaesu FL-7000 to Orion

[Bob Henderson <bob@cytanet.com.cy>]

Don

Not quite.......to interface the Orion to the FL7000 for auto band 
change you will require some logic to make the interfaces compatible.  
This will take the form of a 16 to 4 line encoder of some type.  
Definately not just a cable.  If you are not familiar with binary logic 
yourself you'll need to enlist the help of someone local to you who is.

I hope I've clarified that for you.

73  Bob, 5B4AGN

Don wrote:

> Bob
>
>
> "It is possible to auto band change the FL7000 or other Yaesu amp from 
> the Orion but not without an encoder to produce compatible band data.
>
> Yaesu provide binary parallel band data from their radios and that is 
> what the FL7000 uses for auto band switching."
>
> So if I understand this correctly to "auto" band switch all I should have to do 
> is make up the cable?  Just want to confirm that I am reading correctly.
>
> thanks
>
> Don kd6hq
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>  



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec