[TenTec] increasing audio output

[Richard Hemingway <rheming1@sbcglobal.net>]

I am running MultiMode with the Orion.  No problem on PSK but when I 
try to run CW on TX it seems that one of the problems is that the 
audio output from the Orion to the computer should be increased.
I am using the AUX cable, pin 4, which is the left side output - into 
the computer.  I am using an Apple G5 running Panther and have the 
input volume all the way up.
This is strange in that I have no problem reading even the faint RX 
on PSK with the computer volume up only about 75%.  When I try to 
read CW I don't even have garbage on the screen.
Thanks,

Dick, N5XRD