To: | tentec@contesting.com |
---|---|
Subject: | [TenTec] TT Orion: Also SEMI-BK-IN possible ? |
From: | Ulrich Hilsinger <dh0ghu@dh0ghu.de> |
Reply-to: | dh0ghu@dh0ghu.de, tentec@contesting.com |
Date: | Sat, 27 Dec 2003 22:39:21 +0100 |
List-post: | <mailto:tentec@contesting.com> |
Hello, a lot of words have been exchanged for the QSK/PTT theme - for me, just another problem concerning QSK operation is important right now while planning my station upgrade: If I purchase the ORION, I want to use him not only for HF Contesting & DXing, but also for my VHF/UHF contest activities too. Doing this, I will use my existing VHF/UHF equipment. I'm absolutely not shure about the QSK-proofness of the components in my actual configuration, especially if regarding this from a MTBF point of view. I even would state: It is not really QSK proof. Actually, for this reason, I operate the equipment in semi-break-in (only during longer periods without dot or dash, the TRX switches to RX), which can be defined with the VOX adjustment. Is such a semi-break-in possible with the ORION ? Otherwise, I'll get some problems and probably have to use some awful tricks to get it integrated in my VHF/UHF contesting environment. For those knowing the VHF scene a bit: The current equipment for 2m consists of a TS850S, a SSB-Electronic LT2S-MKII transverter and a BEKO HLV300 MOSFET linear amp. On 70cm, the same TS850 feeds a LT70S which powers a BEKO HLV120/3 bipolar amplifier. Cables to the antennas are short, so no care has to be taken about preamp sequencing: there are none. One of the two bands, most probably the more difficult 2m band, shall be moved to the ORION. The other band will be handled by the TS850, allowing something comparable to SO2R operation :-). It would be fine to have everything running for the ARRL international DX / SSB part, which is on the same weekend as our next big VHF test.. humm I nearly should by 2 Orions for that purpose :-) And yes: it is out of question to change the VHF/UHF equipment, that's just a few eurocents too expensive... By the way, the last time I used manual PTT keying for CW was when I operated my old IC202 for some contest and DX QSOs on 2m... that's been back in 1996... I really do not see a drawback in the "missing" PTT abilities. As long as a semi-breakin decay time can be set high enough for the problem described above.
Ulrich DH0GHU dh0ghu@dh0ghu.de http://www.dh0ghu.de
|
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TenTec] K2/100, Orion review, John Farler |
---|---|
Next by Date: | Re: [TenTec] Sale of the year, SSloane904 |
Previous by Thread: | [TenTec] Sale of the year, Robert M. Schnick |
Next by Thread: | Re: [TenTec] TT Orion: Also SEMI-BK-IN possible ?, Carl Moreschi |
Indexes: | [Date] [Thread] [Top] [All Lists] |