TenTec
[Top] [All Lists]

[TenTec] Background on Delta 580?

To: <tentec@contesting.com>
Subject: [TenTec] Background on Delta 580?
From: nz7c@cox.net (Tim)
Date: Sun Aug 3 18:35:00 2003
Thanks for all of the input from many people on the Delta 580. Except for
freq readout issues all feedback is positive. 73/Tim NZ7C
----- Original Message -----
From: "Frank Creel" <fcreel@surfbest.net>
To: "Winston F. Jones" <winjones@ix.netcom.com>; <tentec@contesting.com>
Sent: Sunday, August 03, 2003 1:28 PM
Subject: Re: [TenTec] Background on Delta 580?


> I have two delta 580's and they are great quite radios.  Solid stable and
no
> quirks.  have run them base and mobile and enjoyed them for several years.
> Frank WA5CWE
> ----- Original Message -----
> From: "Winston F. Jones" <winjones@ix.netcom.com>
> To: <tentec@contesting.com>
> Sent: Saturday, August 02, 2003 4:50 PM
> Subject: Re: [TenTec] Background on Delta 580?
>
>
> > Tim,
> > I owned  a Delta 590 for  awhile. It had a brownish/black colored
cabinet,
> > different from the typical Ten-Tec black.
> > It was about the same height as the Argosy, but wider and deeper.  The
> Omni
> > C was much bigger in size.
> > I like the 580. It has the typically good Ten-Tec audio and QSK keying.
> > In  my opinion, it's biggest fault was the digital readout. I can't
> remember
> > the exact technical situation, but it never reads right on the hundred
> cycle
> > digit. Something to do with how it's time based.
> > 73, Winston K4CWQ
> > ----- Original Message -----
> > From: "Tim" <nz7c@cox.net>
> > To: <tentec@contesting.com>
> > Sent: Saturday, August 02, 2003 17:30 PM
> > Subject: [TenTec] Background on Delta 580?
> >
> >
> > > I cannot find any information on the Delta 580. QST does not seem to
> have
> > a
> > > review in their files and the Unofficial TenTec pages do not fill in
too
> > > much. Can any one tell me how successful it was? How long it was on
the
> > > market? What good or bad characteristics did it develop a reputation
> for?
> > > How did it compare in size to an Argosy or an Omni C - somewhere in
> > between?
> > > Parts still available?
> > > If anyone is familiar with the rig, your thoughts would be most
> > appreciated.
> > > 73/Tim BZ7C
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>